What To Do If Your Water Heater All Of A Sudden Stops Working

Get Quote Now

We've found this great article about How to Troubleshoot and Repair an Electric Water Heater listed below on the web and believe it made sense to write about it with you on my blog.


What Would Cause My Electric Water Heater to Stop Working?
Lots of contemporary residences use an electrical water heater for their heating system, because of its ease as well as convenience of use. Nevertheless, similar to any other electrical home appliances, troubles may emerge with its usage, all of a sudden. It can be truly irritating to wake up to a cool shower instead of a hot one or having your bath with water that isn't warm enough and even too hot. Whatever the instance may be, water heater troubles can be quite stressful. Fortunately, we've made a checklist of feasible services to your hot water heater issues. There are a number of aspects that could cause a number of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the main power supply for security. Whatever the trouble is, getting it fixed ought to not present way too much of an issue if you follow these actions:

Call A Specialist:


If after changing all faulty parts and also resetting your temperature, the hot water heater still isn't working, you might need to speak to a professional plumber for a professional opinion. The problem with your heating system could be that the hot and cold taps have been changed or it might be undersized for the quantity of warm water required in your home. Whatever the situation might be, a specialist plumber would certainly aid address the problem.

Check Your Power Supply:


As basic as this may seem, it is extremely needed. Without ample power, your hot water heater will certainly not operate. So the first thing to do when your water suddenly retires is to validate that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, merely transform it on and off once again. Change any type of damaged or damaged fuse. Check the home appliance with power after these modifications to see if it's currently working.

Inspect Your Thermostat:


If your water heater still isn't working or the water coming out isn't warm sufficient, you might require to inspect the temperature level settings on your upper thermostat. Guarantee the circuit breaker is switched off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature reset above the thermostat. This ought to help heat the water. Transform the breaker back on and examine if the trouble has actually been solved.

Inspect the Heating Element in the Water Heater:


If it's not a power problem, after that attempt taking a look at your burner if it is still working. Test each of your burner to ensure the trouble isn't with any of them. If any one of them is defective, replace that part and after that inspect whether the hot water is back on.

Verdict


Hot water heater issues are not always significant. Much of them are because of minor concerns like a blown fuse or damaged heating element. Changing the malfunctioning parts should suffice. Nevertheless, if you are still unable to address the issue, give a call to your closest plumber to come to get it repaired.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


No Hot Water — Water Heater Repair

Hopefully you enjoyed our topic about Hot Water Heater Repair. Thanks a lot for taking the time to read through our article. Are you aware of someone else who is intrigued by the topic? Be sure share it. I love reading our article about No Hot Water — Water Heater Repair.



Learn More

Leave a Reply

Your email address will not be published. Required fields are marked *